morganstudioonline is the satisfactory and correct way i have ever encounter to put together and pass IT checks. The component is, it offers you accurately and precisely what you need to recognise for 117-201 exam. My pals used morganstudioonline for Cisco, Oracle, Microsoft, ISC and other certifications, all exact and valid. completely dependable, my private preferred.
Is there a shortcut to fast put together and pass 117-201 examination?
HI, I had enroll for 117-201. Though I had read all chapters in depth, but your question bank provided enough practise. I cleared this exam with 99 % yesterday, Thanks a lot for to the point question bank. Even my doubts were clarified in minimum time. I wish to use your service in future as well. You guys are doing a great job. Thanks and Regards.
How long prep is needed to pass 117-201 exam?
I got this pack and passed the 117-201 exam with 97% marks after 10 days. Im extremely fulfilled by the result. There may be great stuff for partner level confirmations, yet concerning the expert level, I think this is the main solid plan of action for quality stuff, particularly with the exam simulator that gives you a chance to practice with the look and feel of a genuine exam. This is a totally substantial brain dump, true study guide. This is elusive for cutting edge exams.
Do you need dumps of 117-201 exam to pass the exam?
well, I did it and that i cannot consider it. I should in no way have passed the 117-201 with out your assist. My score turned into so high i was surprised at my overall performance. Its just due to you. thanks very a lot!!!
Did you attempted this great source of 117-201 cutting-edge dumps.
I passed 117-201 exam. way to morganstudioonline. The exam could be very tough, and i dont realize how long it'd take me to prepareon my own. morganstudioonline questions are very clean to memorize, and the quality part is that they're actual and accurate. so that you essentially move in knowing what youll see for your exam. so long as you skip this complex examination and positioned your 117-201 certification to your resume.
New Syllabus 117-201 examination prep observe manual with q and a are provided here.
morganstudioonline! Big thanks to you. Last month when I was too much worried about my 117-201 exam this site help me a lot for scoring high. As everyone knows that 117-201 certification is too much difficult but for me it was not too much difficult, as I had 117-201 material in my hand. After experiencing such reliable material I advised to all the students to incline towards the best educational services of this site for your preparation. My good wishes are with you all for your 117-201 certificate.
right understanding and look at with the 117-201 Q&A and Dumps! What a mixture!
morganstudioonline questions and answers helped me to recognise what precisely is predicted in the exam 117-201. I prepared properly within 10 days of preparation and completed all the questions of exam in 80 minutes. It comprise the topics just like exam factor of view and makes you memorize all the subjects effortlessly and correctly. It also helped me to understand a way to control the time to finish the exam before time. it is fine technique.
put together these 117-201 real questions and sense assured.
sure, the question bank could be very useful and that i suggest it to anyone who desires to take those assessments. Congrats on a process properly concept out and done. I cleared my 117-201 tests.
wherein am i able to discover 117-201 real Questions questions?
i have never used one of these first-rate Dumps for my mastering. It assisted properly for the 117-201 exam. I already used the morganstudioonline morganstudioonline and passed my 117-201 exam. it's miles the flexible material to use. however, i used to be a under common candidate, it made me pass within the examination too. I used most effective morganstudioonline for the getting to know and by no means used any other fabric. i can hold on using your product for my future exams too. got 98%.
That was Awesome! I got real questions of 117-201 exam.
I sincerely thank you. I have cleared the 117-201 exam with the help of your mock tests. It was very much helpful. I surely would recommend to those who are going to appear the 117-201.
which RAID level value must used with mdadm create array mirrored stripper ?
Simulate failure in RAID
mdam --remove /dev/md0 /dev/sda1
mdam --zero-superblock /dev/md0 /dev/sda1
mdam --force-fail /dev/md0 /dev/sda1
mdam -fail /dev/md0 /dev/sda1
command to mount floppy (non-root)
Doing a file sytem check how we can answer to all question "yes".
Answer: fsck -y
With what programms can you find out the IP and MAC of your network neighbors (choose Two):
Answer: A, B
Which command would you use to apply a diff file to an original?
patch > diff-file
patch < diff-file
patch << diff-file
cat diff-file >> kernel
patch takes a patch file patchfile containing a difference listing produced by the diff program and applies those differences to one or more original files, producing patched versions. Normally the patched versions are put in place of the originals. Running patch command by taking input from the diff-file
If the current directory is /root and the kernel source is located in /usr/src/linux, which of the following commands should be used to apply the patch /tmp/foopatch?
cat /tmp/foopatch | patch -p0
cd /usr/src/linux; patch -p1 < /tmp/foopatch
cd /usr/src/linux; patch -p1 > /tmp/foopatch
cd /usr/src/linux; cat /tmp/foopatch | patch -p0
which record in DNS should be present so that the application could use reverse DNS
Folder location of runlevel 2 related files
ls -l file.txt --> 400Kb du -sh file.txt --> 4Kb is the same file , why the result are different?
Answer: file contain blocks of zero bits A
LPI 117-201 Exam (Linux-Linux Advanced Administration) Detailed Information
LPI is the global certification standard and career support organization for open source professionals. With more than 500,000 exams delivered, it's the world’s first and largest vendor-neutral Linux and open source certification body. LPI has certified professionals in 181 countries, delivers exams in 9 languages, and has over 200 training partners.
Recommended for professionals: LPIC-1, LPIC-2 and LPIC-3
For IT professionals who want their Linux and open source skills verified in order to boost their career momentum, why wait? According to the Foote Partners report, ‘IT Skills and Certification Index’, there’s double-digit growth in bonuses paid to LPI certified candidates.
According to CompTIA HR perceptions of IT Training and Certification study:
96% use IT certifications as screening or hiring criteria during recruitment.
90% agree IT certified individuals are more likely to be promoted than those without.
89% think IT certified individuals perform better than non certified individuals in similar job roles.
88% say IT certified employees are rewarded (bonus and pay increase) for obtaining IT certification.
94% expect IT certification to grow in importance over the next two years.
88% believe it’s important to test after training to confirm knowledge gains.
97% value certification enough to provide support for IT employees obtaining certification.
The open source Jobs Report says hiring managers are looking for open source professionals.
34% are willing to aid with the cost of an employee's open source certification
59% are looking to increase open source hiring
74% have a need for developers
58% are seeking DevOps professionals
65% report open source hiring will rise more than hiring in other departments
87% say it's hard to find open source talent
"ManpowerGroup recently found that 36% of employers globally reported talent shortages in 2014—the highest percentage in seven years. In the United States, more than half (54%) of employers currently have open positions for which they can’t find qualified candidates. Unemployment rates for highly skilled workers continue to fall, job openings are on the rise and companies are finding an increased need to focus their attention on finding staff with job-specific skills needed to meet rapidly changing technologies.”
— ITCC, 2016 white paper, ’The trends that will affect the IT certification industry by 2020’
How open source professionals keep their skills up to date:
open source Jobs Report 2016 open source Jobs Report 2016
LPI tops the list of Linux certs by population according to Certification Magazine
1. Linux Professional Institute LPIC-1 37.9%
2. Linux Foundation Certified Systems Administrator (LFCS) 36.0%
3. Red Hat Certified Engineer (RHCE) 24.2%
4. Red Hat Certified Systems Administrator (RHCSA) 22.2%
5. SUSE Certified Linux Administrator (CLA) 20.3%
6. CompTIA Linux+ Powered by LPI 18.3%
7. Linux Professional Institute LPIC-2 17.0%
8. Novell Certified Linux Professional 15.7%
9. Linux Foundation Certified Engineer 13.7%
10. Red Hat Certified Architect (RHCA) 8.5%
How we create our certifications
LPI is committed to providing the IT community with exams of the highest quality, relevance, and accuracy. This commitment requires that our exam development process is highly detailed, participatory, consultative and employs many of the proven techniques used by most other IT certification programs.
LPI’s exam development process is detailed, thorough, participatory, collaborative and employs many proven techniques used by the best IT certification programs.
Psychometrics, the study of testing and measuring mental capacity, is used throughout LPI certification development to ensure that our exams reflect the needs of the IT community and industry.
As a part of our ongoing certification development process we continually monitor the needs of the Linux and IT markets to ensure our exams effectively evaluate candidates on the most relevant skills.
When we began this process in the late 1990’s we initially launched a two-tiered certification track that became what is known as LPIC-1 and LPIC-2 today. Over the years we have expanded our offerings to include the third tier to the LPIC professional track with the three enterprise specialties of LPIC-3. We’ve also introduced an entry-level certificate program, Linux Essentials, for those seeking to add some Linux to their credentials.
Job Task Analysis
After development of a program structure and a job description for an exam or series, the next stage is to scientifically determine the skills, tasks and areas of knowledge needed for the job. The challenge: Anyone could come up with a list of tasks they think a Linux professional should be able to do. If you ask 10 Linux professionals what a “junior-level” professional should do, you might get 10 lists.
Which list is correct?
Our solution: We ask a large number of Linux professionals for their lists of necessary job duties, and then compile the responses to find the common and most important tasks. The most important tasks show up on all lists.
This process is called job analysis study or job task analysis. LPI has completed extensive job analysis surveys of Linux professionals to help ensure exams are unbiased and constructed fairly.
How we do it:
First we work with a large pool of subject-matter experts to compile an exhaustive list of all the tasks that they think might be performed by the target audience of the certification.
Job Analysis Survey
Next, the tasks collected during the pre-survey go into a job analysis survey. This survey asks practicing Linux professionals to rate each task in several ways:
Frequency: How often they perform the task.
Importance: How important it is for an administrator to be able to perform the task.
Finally, we conduct statistical analysis of the survey responses. We compute statistics indicating, on average, how critical respondents rated each task. This analysis guides the determination of the final job task list.
The third major stage of development is converting the results from the Job Analysis Study to develop the actual objectives for the exam(s). Objectives express specific things that Linux professionals must be able to do. Each objective is assigned a weighting value indicating its importance relative to other objectives.
Initial Objective Drafting
First, a small group of people with knowledge of both Linux technical issues and psychometric principles drafted an initial set of test objectives, basing them upon the results of the job analysis study.
Objective Review and Revision
After the draft objectives are created, they are placed online in a web based system for public review and comment. This system organizes objectives by exam and content topic, displaying the objectives themselves, along with links to additional documentation about the objectives. Public comments about objectives are collected and then supervisors review the comments and revise the objectives as necessary. The most recent review and revision of the objectives is posted publicly on our LPI Exam Development wiki and we send them to our community and ExamDev mailing list for comments and input.
When the objectives are finalized, we post them to LPI.org and let our community as well as courseware and training providers know, so that the training materials can be updated to reflect the new exam material.
Once the objectives are finalized, we being the process of writing questions, called items, for exams. Security is a major concern in item development. All items are kept as confidential as possible by having those involved in the process sign non-disclosure agreements agreeing not to disclose item content to anyone. LPI also takes other undisclosed security precautions.
Historically, the process used to develop the items for most other IT certification exams was to fly a group of subject-matter experts into a location for a week or more, give them training in how to write items, and then have them work intensely to create the questions.
But this technique is expensive and exclusive. At LPI, during our initial exam development phase we leveraged the power of the community through the internet to encouraged everyone who was interested and knowledgeable to help with item writing.
Since then, LPI has developed new items for exam rotation in house by tapping the knowledge of subject matter experts, online volunteers and participants in item writing workshops.
Supervisors screened all submitted exam items, and accepted, rejected or reworded them. They focused on three criteria:
Redundancy: Items that are substantially identical to previously submitted items are rejected.
Phrasing and Clarity: Items phrased in confusing or otherwise inappropriate ways are rejected or reworded. Supervisors pay attention to ensure that questions can be understood by non-native English speakers.
Accuracy: Supervisors rejected or reworded items that are not technically accurate.
Item Technical Review
Next, LPI uses a group of Linux experts to put items through a technical review. Each item is reviewed by multiple experts. Each expert classifies items as approved, rejected or “other” for rewording or review by others.
The primary technical criteria:
Appropriateness of distractors (for multiple-choice items): Reviewers ensure that the distractor answer choices are incorrect but reasonably plausible.
Phrasing and clarity: Reviewers ensure items are worded in appropriate language.
Supervisors then collect the reviews to determine if each item was:
Accepted based on consensus
Rejected based on consensus
Accepted after further review: If reviewers did not agree, the supervisor might accept it, perhaps based on the opinion of another reviewer.
Rejected after further review: If reviewers did not agree, the supervisor might reject it, perhaps based on the opinion of another reviewer.
Accepted after revision: In some cases, reviewers might suggest rewording the item and the supervisor might accept the item after rewording it.
Live Form Creation
The next stage of development involves assembling items into exams for global deployment. Each test has multiple forms. If candidates fails one form and retake the exam, they receive the different form of the exam on retake attempt.
The Pearson VUE test engine randomly orders the questions of each form when someone takes the exam to ensure two candidates taking the same exam are not tested on the same questions in the same order.
Initial Exam Publishing
Once the LPI psychometric staff has determined the composition of forms, the exam must be converted from text-based items into the actual exam file format to deployed globally through LPI’s network of testing centers.
The exam enter a period of initial testing to determine if the questions are in fact measuring skills and competencies. In IT certification, this period is known as the beta testing period.
During the beta period, candidates can register for tests and complete them at local events. They receive credit, but candidates do not receive scores back immediately after the exam. Beta exams often involve extra questions with an extended-time format as well as additional survey and demographic questions. Several simultaneous processes determine the cut score, so that exams may be evaluated and scored.
Obtaining Enough Exams
Before the passing score can be set, LPI had to accumulate an adequate number of exams taken by people who are similar to the target job description. As our support has grown, our target data numbers continue to grow, helping to generate the most accurate results. As part of the beta exam process, demographic data is taken into account by psychometric staff when reviewing the validity of questions.
Reviewing the Questions
As tests results roll in, psychometric staff start to examine the data. Asking questions such as: Are there questions that everyone gets correct? Are there questions that everyone fails? to determine if there anything wrong with the questions. Exam comments collected during the process are reviewed and questions and concerns are addressed.
Modified Angoff Study
While psychometric staff review incoming data, a separate pool of subject-matter experts simultaneously participated in a modified Angoff study. Their goal, to provide the psychometric staff with additional data to validate questions and assist in setting the passing score.
During this process, the experts:
Receive copies of the exam questions on each form.
Look at each question independently and in consultation with each other and make judgments about how likely a minimally qualified person meeting the job requirements described in a specification sheet would be able to answer the question correctly. In other words, the experts consider the question from the perspective of someone who is at the bottom of the competence scale for job performance.
Rate each question with their estimate of what percentage of people will answer correctly, keeping in mind that on multiple choice questions, some people will get it right by virtue of guessing.
Ideally, the results from the Angoff study should parallel the actual results from the exams in the beta period. Beyond validating item performance, the results of the Angoff study are also used in helping to establish the passing score for exams.
Distributing Score Results
After all of the data collection, the analysis and the Angoff study, the psychometric staff set a passing score, and distribute scores to exam takers who participated in the beta.
Once the beta has been completed, the passing score has been set, and any bad items have been removed or fixed, the exam is ready to be re-published. This work involves significant review and can take a month or more to complete. Once this final review process is complete, we coordinate with Pearson VUE and our partner network to publish the finalized exams for all test takers worldwide.
Why Written Exams
Written exams are a global standard.
Multiple choice is a common standard for most certification and licensure exams. Whether you want to be a doctor, lawyer, or chartered accountant, most professions require that you pass a multiple-choice exam. The procedures for producing high-quality multiple choice exams are firmly established. No such standard exists for hands-on exams. Therefore they tend to be ad hoc and rarely include pilot testing, item analysis, formal standard setting, and equating.
Written exams are valid.
Written job knowledge exams have approximately the same levels of predictive validity as job simulations (Roth et al., 2005)
Written exams are more efficient.
Written exams with individual questions are more efficient than exams with more complex item types. For example, Jodoin (2003) examined innovative item types on an IT certification exam that required examinees to construct answers (e.g. draw a network diagram). He found that these constructed response items provided more information but also took additional time. As a result, he concluded that, “multiple-choice items provide more information per unit time.”
Written exams cover all objectives.
Certification exams (like LPI’s) cover a broad range of knowledge areas. Using individual items, written exams can easily ensure adequate coverage of all objectives. Because of practical constraints, hands-on testing must either sample narrowly from these objectives or cover a much smaller body of knowledge.
Written exams are more valuable.
Hands-on testing is typically more expensive in all phases, including item development, pilot testing, administration, and scoring. If hands-on testing is more expensive but not more reliable or valid, then it offers less value.
Written exams are more reliable and objective.
Scoring practices for open-ended exams vary considerably, but the literature on scoring constructed responses suggests that subjective scoring is often less reliable than the scoring of traditional items. The literature on job performance suggests that objective measures of performance are also unreliable.